Product details
Screen
Characteristics
The wires of this type of mesh are pre-undulated in order to obtain a great rigidity.
It is used in meshes where the ratio between the aperture size and the wire is bigger than normal.
Edge Types
30°open, fold length of leg: 30 mm usable as longitudinal and transverse tightener, radius: 6mm; production range up to and including wire Ø 7mm.
Parallel bent clamping fold usable as trans- verse tightener, fold leg opening 10-20°, radius: 4mm; production range up to and including wire Ø 6mm.
Fold for fine-meshed, thin-wire woven mes-hes, up to a wire diameter of max. 1 mm; fold openings according to specifications.
Specification For Screen Cloth
MANUFACTURED FOLLOWING THESE REGULATIONS:
ISO-14315:1997
ISO-4783/3:1981
ISO-2194:1991
High tensile screen cloth is commonly used in hevy duty applications for scalping and sizing of rocks, aggregates, limestone, etc.
They are weaved in sizes to suite most vibrating screens and are available in: High Tensile Steel-Abrasion resistance
Stainless Steel-Corrosion re Monel. Brass, etc. -General applications
Stainless parameters
| No | G rade | % Chemical Composition | |||
| C | Ni | M n | Cr | ||
| 1 | 304 | ≤ 0.08 | 8. 0-11.0 | ≤2. 0 | 18.0-2 0.0 |
| 2 | 321 | ≤ 0.08 | 9. 0-12.0 | ≤2. 0 | 17.0-1 9.0 |
| 3 | 316 | ≤ 0.08 | 1 0.0-14 .0 | ≤2. 0 | 16.0-1 8.5 |
| 4 | 2205 | ≤ 0.03 | 4.5-6. 5 | 2.5-3 .5 | 21.0-2 4.0 |
| 5 | 2507 | ≤ 0.03 | 6-8 | ≤1. 2 | 24-2 6 |
Other Specifications are also available please check with our sales team
Specification For Screen Cloth
| Wire Dia mm | Min Tensile strength mpa | Max Tensile strength mpa | Min.RA |
| 1.37 | 165 0 | 1 900 | 45% |
| 1.83 | 165 0 | 1 850 | 45% |
| 2.03 | 145 0 | 1 720 | 45% |
| 2.34 | 140 0 | 1 680 | 45% |
| 2.67 | 140 0 | 1 680 | 45% |
| 3.05 | 140 0 | 1 680 | 45% |
| 3.43 | 140 0 | 1 680 | 45% |
| 3.76 | 140 0 | 1 680 | 45% |
| 4.11 | 140 0 | 1 680 | 45% |
| 4 .5 | 140 0 | 1 680 | 45% |
| 4.88 | 140 0 | 1 680 | 45% |
| 5.26 | 140 0 | 1 650 | 45% |
| 5.72 | 140 0 | 1 600 | 45% |
| 6.17 | 140 0 | 1 600 | 45% |
| 7.19 | 140 0 | 1 600 | 38% |
| 7.92 | 130 0 | 1 500 | 38% |
| 8 .5 | 130 0 | 1 500 | 38% |
| 9.19 | 115 0 | 1 500 | 38% |
| 10 | 110 0 | 1 300 | 38% |
| 11.1 | 110 0 | 1 300 | 38% |
| 12.7 | 100 0 | 1 200 | 38% |
Copyright © ACE Mesh Machinery Co., Ltd. All Rights Reserved |Sitemap
